Manufacturer of:Automated Valves,
Actuators, Ball and
Butterfly Valves

DynaQuip Controls Inc.
Live Help
Moisture collection and sediment buildup are the two biggest threats to your compressed air system and tools. Harmful water and sediment produced in the normal operation of air systems causes rust and corrosion to the structure if not removed from the system. These contaminates need to be drained manually or with equipment, to gain the maximum operation of the system. Excessive condensation leads to premature failure of tools and high maintenance or replacement cost. For compressed air, the DRAINMASTER can be used on receivers, dryers, tanks, and drop legs. Other uses for DRAINMASTER include sampling and purging a wide variety of clean liquids or gases.

Left to manual draining, air systems are often neglected or forgotten. Other types of automatic drains have small ports that clog up with sediment, scale and sludge. Float drain linkages immersed in steady corrosive drain solutions eventually clog and malfunction. Solenoid type drains use Y-strainers upstream that require frequent manual clean out.

What sets DRAINMASTER apart? The DRAINMASTER uses a full port brass ball valve that allows sediment and material to leave easily and quickly without clogging. The powerful electric motor operates the valve under the most adverse conditions without sticking and jamming. Available in sizes 1/2" to 1 1/4", we have a correctly sized solution for your piping needs.
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Valve Size

Temperature Range - Media

Temperature Range - Ambient

Discharge Volume/Cycle

Cycle Intervals

AD1B 1/2 N/A 1/2 in N/A -15 to 300 ºF N/A 35 to 165 ºF N/A 0.92 gal @ 80 psi N/A (7) 5 min - 24 hours
AD1B 3/4 N/A 3/4 in N/A -15 to 300 ºF N/A 35 to 165 ºF N/A 1.64 gal @ 80 psi N/A (7) 5 min - 24 hours
AD1B 1 N/A 1 in N/A -15 to 300 ºF N/A 35 to 165 ºF N/A 2.5 gal @ 80 psi N/A (7) 5 min - 24 hours
AD2A 1/2 N/A 1/2 in N/A -15 to 300 ºF N/A 35 to 165 ºF N/A 3.1 gal @ 80 psi N/A (20) 1 min - 14 days
AD2A 3/4 N/A 3/4 in N/A -15 to 300 ºF N/A 35 to 165 ºF N/A 6.0 gal @ 80 psi N/A (20) 1 min - 14 days
AD2A 1 N/A 1 in N/A -15 to 300 ºF N/A 35 to 165 ºF N/A 7.7 gal @ 80 psi N/A (20) 1 min - 14 days
AD2A 1 1/4 N/A 1 1/4 in N/A -15 to 300 ºF N/A 35 to 165 ºF N/A 12.8 gal @ 80 psi N/A (20) 1 min - 14 days
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 
DynaQuip Controls Inc. - Meeting Your Valve Needs with Experience, Flexibility and Innovation...