Manufacturer of:Automated Valves,
Actuators, Ball and
Butterfly Valves

DynaQuip Controls Inc.
Live Help
Moisture collection and sediment buildup are the two biggest threats to your compressed air system and tools. Harmful water and sediment produced in the normal operation of air systems causes rust and corrosion to the structure if not removed from the system. These contaminates need to be drained manually or with equipment, to gain the maximum operation of the system. Excessive condensation leads to premature failure of tools and high maintenance or replacement cost. For compressed air, the DRAINMASTER can be used on receivers, dryers, tanks, and drop legs. Other uses for DRAINMASTER include sampling and purging a wide variety of clean liquids or gases.

Left to manual draining, air systems are often neglected or forgotten. Other types of automatic drains have small ports that clog up with sediment, scale and sludge. Float drain linkages immersed in steady corrosive drain solutions eventually clog and malfunction. Solenoid type drains use Y-strainers upstream that require frequent manual clean out.

What sets DRAINMASTER apart? The DRAINMASTER uses a full port brass ball valve that allows sediment and material to leave easily and quickly without clogging. The powerful electric motor operates the valve under the most adverse conditions without sticking and jamming. Available in sizes 1/2" to 1 1/4", we have a correctly sized solution for your piping needs.
Unit of Measure

Specifications

Series

N/A DRAINMASTER®

Valve Type

N/A Ball

Valve Size

N/A 3/4 in

Actuator Type

N/A Electric

Connection Type

N/A FNPT

Body Style

N/A 2 Piece

Temperature Range - Media

N/A -15 to 300 ºF

Temperature Range - Ambient

N/A 35 to 165 ºF

Weight

N/A 4.60 lb

Voltage

N/A 120 VAC

Operator

N/A Electric Actuator

Discharge Volume/Cycle

N/A 1.64 gal @ 80 psi

Cycle Intervals

N/A (7) 5 min - 24 hours

Materials

Body Material

N/A Brass

Seat Material

N/A RTFE

Dimensions

Body Length

N/A 2.93 in

Application

N/A Automatic Timed Drain Valve, Drip Legs, Compressor Systems, Air Dryer, Drain Points, Air Receivers, Separators, Aftercoolers, Coalescers, Refrigerated Dryer Blow-Down, Condensate Remover, Air Lines, Automated Drain

Features

N/A

  • Onboard push button "test" button to purge on demand
  • Adjustable Cycle Time: 10 Interval Settings from 5 minutes to 24 hours
  • LED display
  • Discharge Time: 3.5 seconds (Non-Adjustable) for minimal air loss
  • Operating Temperature: 35° to 165 °F
  • Motor Housing: Polycarbote, NEMA 4 (Weatherproof)
  • Ball Valve: Full Port, Forged Brass (NSF61G available)
  • Motor: Heavy Duty, Unidirectiol
  • DRAINMASTER® can be mounted in any position
  • Gear Train: Hardened Steel
  • Power: 110 VAC, 60 Hz, PH1, 8 Foot Grounded power cord
  • 1/4" Bushing Included with 1/2" DRAINMASTER®, 3/4" and 1" sizes available

DynaQuip Controls Inc. - Meeting Your Valve Needs with Experience, Flexibility and Innovation...